Toilet Weight With And Without Water: The Answers!

Last Updated on September 19, 2022 by Alex Cubias

A toilet is a part of every home throughout the country, however, it is an aspect of the home many often do not give much thought to. Before installing a new toilet, it can be beneficial to know how heavy a toilet it is. So, what does a toilet weigh with and without water?

A toilet with water can weigh anywhere from 60 pounds to 130 pounds. A toilet without water typically weighs between 55 pounds and 88 pounds. There are many factors that can impact and change how much a toilet weighs, such as whether or not the tank is attached.

It can be difficult to learn about all the different factors that affect the weight of a toilet. There is a lot of research that can be done in order to help an individual to feel knowledgeable about this topic. After conducting research, the following information about the weight of toilets has been compiled to help individuals begin their research in learning about what impacts the weight of a toilet.

The Weight of a Toilet with Water

On average, a toilet with water can weigh somewhere between 60 pounds to 130 pounds. It can be challenging to get an accurate average weight of a toilet with water considering there are many factors that can cause a toilet to weigh more or less.

The first factor is whether the toilet is one or two pieces. If the tank is attached to the bowl before it is fired in the kiln, it typically weighs more than when these two parts are attached after being placed in the kiln. One-piece toilets tend to be heavier than two-piece toilets as a result of the extra weight being added during the process in which the toilet is prepared for the kiln.

Another factor that can impact how heavy a toilet weighs is the amount of water a tank can hold. Some toilets have smaller tanks, meaning that there is not as much weight added as a result of the toilet being filled with water. However, there are some toilets that are able to hold quite a bit more water, which causes them to weigh more than toilets with smaller tanks.

The Weight of a Toilet Without Water

Typically, a toilet without water weighs between 55 and 88 pounds. While this is a smaller range than the range for a toilet’s weight with water, this is still a big range.

There are some similar factors that cause toilets without water to weigh more or less. If a toilet is a one-piece or a two-piece affects the weight of a toilet with or without water in it.

A factor that largely impacts how much a toilet weighs is what the toilet is made out of. The three main materials that toilets are made out of are porcelain, ceramic, and stainless steel. All of these materials vary in weight, which impacts how heavy the toilet that is created out of these materials will be. (Source)

Another factor that affects the weight of a toilet without water is the size of the toilet. A smaller toilet made out of porcelain is going to weigh less than a larger toilet made out of that same material.

How Much Water Is Needed to Fill a Toilet?

The amount of water that is required to fill a toilet depends on the type of toilet as well as the size of the toilet. There are some toilets that are water efficient, meaning they require less water than regular toilets.

Typically, it is up to the individual how much water is in the toilet. It is a good baseline to ensure that there are at least a few inches of water in the bowl. This allows the toilet to flush easily. However, it is important to make sure that the water level is not too close to the lip of the toilet, or else there can be some splashing upon use. (Source)

What’s the Difference Between One-Piece and Two-Piece Toilets?

There are differences between a one-piece toilet and a two-piece toilet outside the fact that one has an attached tank while the other has a separate tank.

One-piece toilets tend to be heavier and more durable, but as a result, they tend to be more expensive. Being one-piece makes this toilet easier to clean than a two-piece toilet. Many find that the one-piece toilet has more of a higher-end look which can add to an individual’s bathroom. This type of toilet is typically fairly easy to install, and homeowners are typically able to install them without needing to get a plumber involved. (Source)

A two-piece toilet is the one that many households have. They are a lot cheaper than a one-piece toilet, but as a result, tend to be less durable which means they typically need to be replaced more frequently than a one-piece toilet. This type of toilet typically has a more complex installation process which can make installing them require an actual plumber instead of being something that can be done by a homeowner. (Source)

Can a Toilet Be Lifted by One Person?

Depending on the weight of a toilet, it is possible for the toilet to be lifted and moved by one individual. However, it is suggested to have someone else nearby in case the toilet is heavier than one was anticipating or in case something goes awry.

It is possible for an individual to know how much their toilet is, but it typically is just a general estimate of how heavy the toilet is.

When a toilet is being moved, it is completely empty which means that there is no added weight from the water being in the tank and the bowl. This means that typically, a toilet weighs anywhere from 55 to 88 pounds. This is a reasonable weight for an individual to move a short distance on their own.

If the toilet is being moved a greater distance, recruiting some assistance might be beneficial.